NVIDIA Ampere Streaming Multiprocessors
2nd Generation RT Cores
3rd Generation Tensor Cores
Powered by GeForce RTXâ„¢ 3090 Ti
Integrated with 24GB GDDR6X 384-bit memory interface
WINDFORCE 3X Cooling System with alternate spinning fans
Vapor Chamber
Protection metal back plate
WINDFORCE 3X
COOLING SYSTEM
The WINDFORCE 3X cooling system features 3x 100mm unique blade fans, alternate spinning, vapor chamber, 8 composite copper heat pipes, 3D active fan and Screen cooling, which together provide high efficiency heat dissipation.
ALTERNATE SPINNING
Alternate Spinning can reduce the turbulence of adjacent fans and increase air pressure.
SMOOTH AIRFLOW
GIGABYTE turns the adjacent fans in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.
3D ACTIVE FAN
The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU is in a low load or low power game.
UPGRADED UNIQUE BLADE FAN
By precisely fine-tuning the angle and the shape of the fan blades, coupling with the triangular fan edge and 3D stripe curve on the fan surface to smoothly guide the airflow, the upgraded cooling fans can generate a greater amount of air intake at the same fan speed.
DOUBLE BALL BEARING
The double ball bearing structure has better heat endurance and efficiency than sleeve structure.
SCREEN COOLING
Extended heatsink design allows air flow to pass through, providing better heat dissipation.
VAPOR CHAMBER & HEAT PIPES
With direct contact to the GPU and VRAM, the large copper plate combines the composite heat pipes to efficiently transfer heat generated from the interior cores to the heat sink.
PROTECTION METAL BACK PLATE
The metal back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.
DUAL BIOS
Silent mode will provide a quieter experience. The mode switch requires a reboot to take effect. The default is OC mode.
NVIDIA NVLINKâ„¢ SUPPORT
Support for NVIDIA NVLinkTM (NVIDIA SLI) technology, which combines 2 identical GPUs with an GeForce RTX NVLink Bridge to deliver the ultimate experience in 4K gaming or VR gaming.
AEROSPACE-GRADE PCB COATING
Dust resistant - shields from dust, insects, dropped screws, drill shavings, and abrasion.
Moisture resistant - prevents unwanted conduction paths and board damage.
Corrosion resistant - protects from salt spray, humidity, and corrosion.
EXTREME DURABILITY AND OVERCLOCKING
The graphics card uses the better power phase design to allow the MOSFET to operate at lower temperature, and over-temperature protection design and load balancing for each MOSFET, plus the Ultra Durable certified chokes and capacitors, to provide excellent performance and longer system life.
FRIENDLY PCB DESIGN
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.
AORUS ENGINE
The cutting edge intuitive interface allows you to adjust the clock speed, voltage, fan performance and power target in real-time according to your game’s requirements.
Graphics Processing : GeForce RTXâ„¢ 3090 Ti
Core Clock : 1905 MHz (Reference Card: 1860 MHz)
CUDA® Cores : 10752
Memory Clock : 21000 MHz
Memory Size : 24 GB
Memory Type : GDDR6X
Memory Bus : 384 bit
Memory Bandwidth (GB/sec) : 1008 GB/s
Card Bus : PCI-E 4.0 x 16
Digital max resolution : 7680x4320
Multi-view : 4
Card size : L=331 W=150 H=70 mm
PCB Form : ATX
DirectX : 12 Ultimate
OpenGL : 4.6
Recommended PSU : 850W
Power Connectors : 16 pin*1
Output : DisplayPort 1.4a *3 : HDMI 2.1 *1
SLI Support : 2‎-way NVIDIA NVLINK™
Accessories
1. Quick guide
2. 4-year warranty registration
3. VGA holder
4. One 12 pin to triple 8 pin connectors cable
All Rights Reserved © 2024 Quadrastores | Dar Technical General Trading Company | Developed By MicroSolutions